Modification of Lubrication Device of Cone Crusher

Cone crusher is suitable for crushing hard and mid-hard ores and rocks. The features of spring cone crushers are: reliable structure, high productivity, easy adjustment, economic cost etc. Type of crushing chamber depends on application of the ores. Standard type (PYZ) applies to middle crushing; middle type (PYD) applies to middle-fine crushing. Short-head type is suitable for fine crushing. Cone crusher is applicable for crushing various rocks and ores with medium hardness. Spring cone crusher is widely used in metallurgical, construction, utilities, transport, chemicals, building materials industry, for breaking hard, medium hardness of the above various ores and rocks.

Because the equipment is still in the stage, the oil return magnetic mesh filter should be cleaned once a week; When the device is working properly after three months, back to the oil magnetic mesh filters should be cleaned once a month.

The lubricating oil goes into the cone crusher by two paths. One goes in from the bottom oil hole of cone crusher, and then divides into three directions to the inside and outside of the hollow eccentric shaft, the middle oil hole of the main bearing and the bowl type bearing, going through the hole lubricating big and small gear, and then the oil will return from the bottom oil returning hole of the small bevel gear. The other oil path is from the hole of the driving bearing shelf, lubricating the driving bearing, and its oil returning is also from the oil returning hole of the small bevel gear and the shield. The oil returning goes back to the oil box from the single oil pipe.

Spring cone crusher lubrication system in the host before work, first open the oil pump, the system reaches a certain pressure, and then start the host. Host after you stop working, and then stop the pump. Spring cone crusher thin oil lubrication system lubrication oil station, oil pressure, oil temperature, oil level is not normal circumstances, there is a corresponding signal light and horn alarm, first uninstall the horn, and then the failure to take measures to deal with the fault lights display.